Tektronix TDS5000B Series - Capturing High Resolution Events with Acquisition Memory

Commands
5-26
TDS5000B Series Service Manual
DIAg:LOOPS?
This query-only command returns the number of times that the selected
diagnostics set was completed during the last di agnostic execution. This
command is equivalent to selecting Instrument Diagnostics from the Utilities
menu and then reviewing the Elapsed C ount .
This command can be issued while diagnostics are still in progress.
DIAg:LOOPS?
DIAg:LOOPS?
This query might return
:DIAG:LOOPS 5
indicating that the selected set of diagnostics was completed 5 times during the
last diagnostic execution.
DIAg:NAMe?
This query-only command returns the names of the subsystem, area and test of
the current diagnostic test.
This query can be issued while diagnostics are sti l l in progress.
DIAg:NAMe:AREA?, DIAg:NAMe:SUBSYS?, DIAg:NAMe:TEST?
DIAg:NAMe?
DIAg:NAMe:?
This query might return
:DIAG:NAME:SUBSYS “Processor”;AREA “Memory”;TEST “DRAMWalk1 ”
This indi cates the subsystem name, area name, and test name of the currently
selected diagnostic test.
Syntax
Example
Related Commands
Syntax
Example