Commands
TDS5000B Series Service Manual
5-27
DIAg:NAMe:AREA?
This query-only command returns the selected area of the current diagnostic test.
There are three levels of diagnostic test hierarchy: subsystem, area and test. This
command is equivalent to selecting Instrument Diagnostics from the Utilities
menu, and then reviewing the Diagnostic Status.
This query can be issued while diagnostics are sti l l in progress.
DIAg:NAMe?, DIAg:NAMe:SUBSYS?, DIAg:NAMe:TEST?
DIAg:NAMe:AREA?
DIAg:NAMe:AREA?
This query might return
:DIAG:NAME:AREA “Memory”
indicating the selected area name of the currently selected diagnostic test.
DIAg:NAMe:SUBSYS?
This query-only command returns the subsystem of the current diagnostic test.
This command i s equivalent to selecting Instrument Diagnostics from t he
Utilities menu, and then reviewing the Diagnostic S t atus.
This query can be issued while diagnostics are sti l l in progress.
DIAg:NAMe?, DIAg:NAMe:AREA?, DIAg:NAMe:TEST?
DIAg:NAMe:SUBSYS?
DIAg:NAMe:SUBSYS?
This query might return
:DIAG:NAME:SUBSYS “Acquisition”
indicating the subsystem name of the current diagnostic test.
Related Commands
Syntax
Example
Related Commands
Syntax
Example
To Next Page
Loading...
