Commands
5-28
TDS5000B Series Service Manual
DIAg:NAMe:TEST?
This query-only command returns the name of the current diagnostic test. This
command is equivalent to selecting Instrument Diagnostics from the Utilities
menu, and then reviewing the Diagnostic Status.
This query can be issued while diagnostics are sti l l in progress.
DIAg:NAMe?, DIAg:NAMe:AREA?, DIAg:NAMe:SUBSYS?
DIAg:NAMe:TEST?
DIAg:NAMe:TEST?
This query might return
:DIAG:NAME:TEST “diagDataFormatConf”
indicating the test name of the current diagnostic test.
DIAg:NUMITEMS?
This query-only command returns the number of items on the currently selected
level of test hi erarchy, which ranges from 1 through 15. This command is
equivalent to selecting Instrument Diagnostics from the Utilities menu, and then
reviewing the Diagnostic Status.
This query can be issued while diagnostics are sti l l in progress.
DIAg:NUMITEMS?
DIAg:NUMITEMS?
This query might return
:DIAG:NUMITEMS 7
indicating the number of items on the currently selected level of test hierarchy.
Related Commands
Syntax
Example
Syntax
Example
To Next Page
Loading...
