Tektronix TDS5000B Series - Setting the Trigger Level Marker; Setting the LCD Backlight

Operating Basics
TDS5000B Series Quick Start User Manual
55
Setting the Trigger Level Marker
1. Select Display > Objects....
2. Select one of the following:
H Short displays a short arrow
on the side of the graticule
by the active waveform.
H Long displays a horizontal
line across the graticule.
H Off turns off the trigger level
marker.
2
1
Quick Tip
H To quickly change the trigger level marker, right-click on the trigger level marker and then select the type of
trigger level marker.
Setting the LCD Backlight
1. Select Display > Objects....
2. Click the LCD Backlight Timeout
to turn the backlight on and off.
3. Click Delay to set the delay time
using the multipurpose k nobs.
The delay time is in seconds.
2
3
1