Tektronix TDS5000B Series - Setting the Reference Colors; Setting Math Colors

Operating Basics
58 TDS5000B Series Quick Start User Manual
Setting the Reference Colors
Select D isplay > Colors... and then
select one of the following:
H Default uses the default system
color for reference waveforms.
H Inherit uses the same color for
the reference waveform as the
original waveform.
Setting Math Colors
Select D isplay > Colors... and then
select one of the following:
H Default uses the default system
color for math waveforms.
H Inherit uses the same color for
the math waveform as the
waveform the math function is
based on.
Quick Tips
H The default color for math and reference waveforms are different for each waveform.