Tektronix TDS5000B Series - Lock and Scroll Zoomed Waveforms

Operating Basics
TDS5000B Series Quick Start User Manual
61
Quick Tips
H To clear the zoom area, click Position Factor Reset from the Zoom Setup control window.
H You can turn each zoom display on and off from the Zoom Setup control window.
H Push the MultiView Zoom button to toggle all zoom displays on and off.
H To reposition t he zoomed area horizontally, c lick and drag t he horizontal marker at the bottom of the zoom
box.
Lock and Scroll Zoomed Waveforms
1. To use Lock a nd Scroll select
Zoom Setup... from either the
Vertical or Horiz/Acq menu and
then select the Lock and Scroll
tab.
1
2. To scroll a single zoomed area,
click a Zoom 1-4 button, and then
click an Auto Scroll button.
2
3. To scroll multiple zoomed areas
simultaneously, click Lock, and
then click the Zoom1-4 buttons
that you wa nt to scroll through.
Locking the zoomed areas locks in
their relative horizontal position.
Changing the horizontal position of
one locked and zoomed area changes
them all.
3
Quick Tips
H When multiple zoom areas are selected but not locked, the zoom area with the highest number will
autoscroll, while the other zoom areas remain stationary.