Tenda V1200 - Page 101

91
Parameter
Description
Statically Configure
If this option is selected, you need to manually configure the address prefix and validity
period.
Prefix
It specifies the prefix of the IPv6 address.
Preferred Life Time
(hour)
It specifies the preferred life time in hour. When the time is out, the computer can
continue to use the address in initiated communications, but cannot use it in new
initiated communications.
Valid Life Time
(hour)
It specifies the valid life time of the IP address in hour. When the time is out, the address
is invalid.

Configuration procedure
Step 1 Choose Advanced Setup > LAN > IPv6 Autoconfig to enter the configuration page.
Step 2 Select Enable DHCPv6 Server.
Step 3 Select Stateful.
Step 4 Start/End interface ID: Enter a start/end interface ID.
Step 5 Lease Time: Enter the valid time of an IPv6 address .
Step 6 Select Enable RADVD.
Step 7 Click Save/Apply.
----End