Tenda V1200 - Connections Limited

86
4.2.2 Connections limited
4.2.2.1 Overview
This function allows you to specify the maximum connections between the modem router and a
specified IP address or IP network segment.
Parameter description
Parameter
Description
IP Address
It specifies the IP address or IP network segment of the clients.
Max Connections
It specifies the maximum number of point-to-point connections that the modem router
can handle at the same time.
4.2.2.2 To add a connection limited rule
Step 1 Choose Advanced Setup > LAN > Connections Limited to enter the configuration page.
Step 2 Click Add.
Step 3 Enter an IP address or an IP network segment.
Step 4 Enter the number of the maximum connections.
Step 5 Click Apply/Save.
----End