168
4.21 IPTV
If your ISP provides IPTV service, this function enables you to watch IPTV programs through TV and
the network set-top box while surfing the internet
4.21.1 ATM interface
If your layer 2 interface is ATM Interface, perform the following procedure:
Step 1 Choose Advanced Setup > IPTV to enter the configuration page.
Step 2 Select Enable IPTV option.
Step 3 Select ATM Interface.
Step 4 Select a LAN port to serves as an IPTV port for connecting to the set-top box. The default
IPTV port is lan1 (port 1).
Step 5 Enter the VPI/VCI value provided by your ISP.
Step 6 Click Apply/Save.
----End
To Next Page
Loading...
