213
It specifies whether to enable the SNMP agent function of the modem router. By
default, it is disabled.
It specifies the read password shared between SNMP managers and this SNMP agent.
The default password is public.
It specifies the set password shared between SNMP managers and this SNMP agent.
The default password is private.
It specifies the device name of the modem router. The default system name is the
brand of the modem router.
It specifies the location where the modem router is used. The default location is
unknown.
It specifies the contact information of the modem router. The default location is
unknown.
It specifies the IP address of the server or terminal where alarm information is sent
to.
7.4.2 Configuring the SNMP agent
Step 1 Choose Management > SNMP Agent to access the configuration page.
Step 2 Set SNMP Agent to Enable.
Step 3 Set Read Community to the password for reading data. The default value is public.
Step 4 Set Set Community to the password for writing data. The default value is private.
Step 5 Set System Name to the name of the modem router.
Step 6 Set System Location to the location of the modem router.
Step 7 Set System Contact to the contact information of the modem router.
Step 8 Set Trap Manager IP to the IP address of the Trap Manager.
Step 9 Click Apply/Save.
----End
To Next Page
Loading...
Need help?
General
