106
4.5.4 Multi-NAT
4.5.4.1 Overview
Multi-NAT is a network function whereby one network address is rewritten (translated) to another
address: Network Address Translation is frequently used to allow multiple network nodes
(computers or inter-networked devices) to share a single public (or local network) IP address.
Multi-NAT can work in one-to-one or many-to-one mode.
Choose Advanced Setup > NAT > Multi-NAT to enter the configuration page.
Click Add to configure the function.
One-to-One
Many-to-One
Parameter description
Select a WAN interface that the function uses.
One-to-One: Set a route from a local IP address to a public IP address.
Many-to-One: Set a route from many local IP addresses to a public IP address.
To Next Page
Loading...
