Tenda V1200 - Configuring Modem Router as a PPTP Client

95
4.3.3 Configuring modem router as a PPTP client
Step 1 Choose Advanced Setup > VPN > PPTP Client to enter the configuration page, and click
Add.
Step 2 Set Tunnel Name and PPTP Server(IP address/domain name) based on the information
set on the PPTP server, select an Associated WAN Interface, and click Next.
Parameter
Description
Tunnel Name
It specifies the name of the PPTP connection to be set up.
PPTP Server(IP
address or domain
name)
It specifies the IP address or domain name of the PPTP VPN server to be connected.
Generally, it refers to the IP address or domain name of the WAN port of the peer VPN
router that functions as the PPTP server.
Associated WAN
Interface
It specifies the WAN port of the router for setting up a PPTP VPN connection.
Step 3 Set PPP Username, PPP Password, and PPPoE Service Name based on the information set
on the PPTP server, and click Next.