Tenda V1200 - Page 106

96
Parameter
Description
PPP Username
It specifies the user name and password assigned by peer PPTP server.
PPP Password
PPPoE Service
Name
Optional. If a special service name is specified on peer PPTP server, it can be entered
here. If not, leave it blank.
Authentication
Method
It specifies the authentication method of the VPN connection.
MTU
It specifies the maximum transmission unit size. The default is not recommended.
Step 4 Select default gateway interfaces from the Available Routed WAN Interfaces, and click
to move it to the Select Default Gateway Interfaces box, and click Next.
Step 5 Select DNS server interfaces from the Available WAN Interfaces, and click to move
it to the Select DNS Server Interfaces box.
If your ISP provides DNS address(es), select Use the following Static DNS IP address, and
enter it/them.