152
Step 5 Click Apply/Save.
----End
After the configuration takes effect, all wireless interfaces belong to WLAN_group, and use the
WAN service IP over Ethernet (eth3.1). All wired interfaces (port 1, 2, and 3) belong to the default
group, and use the WAN service Bridging (eth3.2).
If you create many groups, the LAN IP address used by the Default group members is
192.168.1.1, the LAN IP address of the second group member is 192.168.2.1, and so
on.
If the IPTV function is enabled, the modem router automatically creates an interface
group named IPTV. If it is deleted, the IPTV function is not available.
To Next Page
Loading...
