Tenda V1200 - Page 176

166
Parameter
Description
Maximum Multicast
Group Members
It specifies the maximum number of multicast group members. The default is 25. The
value range is 1 to 32.
Fast Leave Enable
If the function is enabled, the modem router does not send group specific-queries
when it receives a leave message.
Parameter description
Parameter
Description
Default Version
It specifies the MLD version for WAN. The default is MLDv2.
Query Interval
It specifies the interval for sending MLD query message. The default is 125. The value
range is 1 to 999. The unit is second.
Query Response
Interval
It specifies the response interval for the query message. The default is 10. The value
range is 1 to 999. The unit is “second”.
Last Member Query
Interval
It specifies the interval for sending query message of specified group. The default is
10. The value range is 1 to 999. The unit is second.
Robustness Value
It specifies the robustness value of MLD querier. The default is 2. The value range is 1
to 999.
Maximum Multicast
Groups
It specifies the maximum number of multicast groups for each interface. The default
is 10. The value range is 1 to 16.
Maximum Multicast
Data Sources (for
mldv2)
It specifies the maximum number of multicast data sources. The default is 10. The
value range is 1 to 16.
Maximum Multicast
Group Members
It specifies the maximum number of multicast group members. The default is 10. The
value range is 1 to 16.