175
configuration page.
Step 2 Select Enabled to enable the function.
Step 3 Click Apply/Save on the bottom of this page.
Step 4 Select Enter STA PIN.
Step 5 Check the WPS PIN code on your wireless device and enter it to the blank box on the WPS
Setup page of the web UI.
Step 6 Click Apply/Save.
----End
The WPS LED indicator blinks for about 2 minutes, and then turns to solid green. It indicates that
the wireless device is connected to the modem router, and the wireless network is encrypted.
Option 3: Using the WPS PIN code of the modem router
Step 1 Log in to the web UI of the modem router, choose Wireless > 2.4G > Security to enter the
configuration page.
Step 2 Select Enabled to enable the function.
Step 3 Click Apply/Save on the bottom of this page.
Step 4 Select Use AP PIN.
Step 5 Enter the Device PIN on your wireless device.
----End
When the WPS LED turns to solid on, the negotiation process is successful and the SSID and
password are changed to random ones.
To Next Page
Loading...
