Tenda V1200 - Page 188

178

WPA-PSK/WPA2-PSK/Mixed WPA2/WPA-PSK
Parameter description
Parameter
Description
WPA-PSK/WPA2-PSK/Mixed
WPA2/WPA-PSK
They specify the security modes implemented based on a shared key.
WPA/WAPI Passphrase
It specifies the password of the wireless network.
WPA/WAPI Encryption
It specifies an algorithm for WPA encryption.

AES: If selected, the maximum wireless speed can reach 300Mbps.

TKIP+AES: If selected, both AES and TKIP enabled wireless clients can join your
wireless network.
Changing the encryption settings of an SSID
Step 1 Choose Wireless > 2.4G > Security to enter the configuration page.
Step 2 Select a SSID to be configured from the drop-down list.
Step 3 Select the network authentication type and set the related parameters as required.
Step 4 Click Apply/Save.
----End