187
MAC address of the wireless network.
802.11ac: If 802.11ac is selected, only 11ac wireless devices can connect to the
wireless network. The maximum of 866 Mbps wireless rate is supported in this
mode.
802.11a/n/ac Mixed: If 802.11a/n/ac Mixed is selected, 11a, 11n or 11ac wireless
devices can connect to the wireless network. The maximum of 866 Mbps wireless
rate is supported in this mode.
Select your country or region.
Select a channel in which the modem router works. Auto indicates that the modem
router automatically changes to a channel rarely used in the ambient environment to
prevent interference.
Select a frequency band of the channel of the modem router.
5.2.1.2 Enabling multiple SSIDs
By setting up multiple SSIDs on a wireless modem router, the modem router can be deployed to
multiple wireless networks, and users can connect to different wireless LANs to avoid interference
with each other.
To enable multiple SSIDs:
Step 1 Choose Wireless > 5G > Basic to enter the configuration page.
Step 2 Select Enable option to enable the corresponding SSID.
Step 3 Customize the name for the SSID if you want.
Step 4 Hidden: It specifies whether to hide the SSID. If the option is selected, wireless devices
cannot find the SSID.
Step 5 Disable WMM Advertise: WMM (Wi-Fi Multimedia) is a Wi-Fi Alliance interoperability
certification based on the IEEE 802.11e standard. Select it if you need to disable WMM
advertise.
Step 6 WMF: It specifies whether to forward multicast packets through unicast tunnels. Generally,
multicast packets are transmitted at the lowest rate, such as 1 Mbps, leading to poor
transmission efficiency. WMF leverages the auto-negotiated high rate, reliable feedback
mechanism, and other advantages of unicast packets to address multicast problems such
as video playback stalls caused by packet loss and long delays over a wireless network.
Step 7 Click Apply/Save.
To Next Page
Loading...
