Tenda V1200 - Traceroute

192
WPA2 Enterprise
Parameter description
Parameter
Description
WPA2 Enterprise
Security modes implemented based on the IEEE 802.1x, which requires the
third-party RADIUS server for authentication.
Network Re-auth
Interval
It specifies an interval at which a WPA key is updated. A shorter interval leads to
higher security. The value 0 indicates that no key update is performed.
RADIUS Server Address
It specifies the IP address of the RADIUS server for authentication.
RADIUS Port
It specifies the authentication port of the RADIUS server. The default port number is
1812.
RADIUS Key
It specifies a shared password of the RADIUS server, which consists of 1 to 64 ASCII
characters.
RADIUS Server2
Address
It specifies the IP address of the secondary RADIUS server for authentication.
WPA/WAPI Encryption
It specifies an algorithm for WPA2 enterprise encryption.

AES: If it is selected, AES enabled wireless clients can join your wireless network.

TKIP+AES: If it is selected, both AES and TKIP enabled wireless clients can join your
wireless network.