14
Static IP
Use this type if you can access the internet only after setting a static IP address and other related
information on your computer.
Step 1 Log in to the web UI and enter the Home page.
Step 2 Link Type: Select Ethernet.
Step 3 Connection Type: Select IPoE.
Step 4 Address Mode: Select Static IP.
Step 5 Enter the static IP address, and other related parameters.
Step 6 Click OK on the bottom of the page to apply the settings.
----End
If you cannot access the internet after completing the primary settings, contact your ISP for
help.
To Next Page
Loading...
