Tenda V1200 - Page 62

52
Parameter description
Parameter
Description
Enable NAT
It is used to enable the NAT.
Enable Fullcone NAT
Data transmitted by a computer in LAN through the UDP port A will be
forwarded to the UDP port B in WAN. And data received by the UDP port B in
WAN will be forwarded to the UDP port A of the corresponding computer in
LAN.
Enable Firewall
Check this option to enable the firewall of the modem router.
Enable IGMP Multicast Proxy
If it is enabled, the modem router can forward the multicast data to the users
in LAN. If you requires multicast applications, such as VOD or AOD, you can
enable this option.
Enable MLD Multicast Proxy
It is used to enable the MLD multicast proxy.