Natrix IOM
TGW Systems Equipment Warranty
TGW Systems warrants that the material and workmanship entering into its equipment is
merchantable and will be furnished in accordance with the specifications stated.
TGW Systems agrees to furnish the purchaser without charge any part proved defective within
2 years from date of shipment or before the equipment has forty-one hundred (4100) hours of
running use, whichever period is shorter, provided the purchaser gives TGW Systems
immediate notice in writing and examination proves the claim that such materials or parts were
defective when furnished. For drive components specific to XenoROL
®
(i.e. Xeno belts, slave
Xeno belts, drive spools, standard and speed-up, and spacers), this warranty shall be
extended to five years or ten thousand (10,000) hours of running use, whichever period is
shorter, provided the conveyors are applied, installed and maintained in accordance with TGW
Systems published standards. Other than the above, there are no warranties which extend
beyond the description on the face hereof. Consequential damages of any sort are wholly
excluded.
The liability of TGW Systems will be limited to the replacement cost of any defective part. All
freight and installation costs relative to any warranted part will be at the expense of the
purchaser. Any liability of TGW Systems under the warranties specified above is conditioned
upon the equipment being installed, handled, operated, and maintained in accordance with the
written instructions provided or approved in writing by TGW Systems.
The warranties specified above do not cover, and TGW Systems makes no warranties which
extend to, damage to the equipment due to deterioration or wear occasioned by chemicals,
abrasion, corrosion or erosion; Purchaser's misapplication, abuse, alteration, operation or
maintenance; abnormal conditions of temperature or dirt; or operation of the equipment above
rated capacities or in an otherwise improper manner.
IMPORTANT
All equipment and components not manufactured by TGW Systems carry only such warranty
as given by the manufacturer thereof, which warranty TGW Systems will assign or otherwise
make available to Purchaser without recourse to TGW Systems, provided that such warranty is
assignable or may be made available.
For service on motors, reduction units, electrical components, controls, air or hydraulic
cylinders, contact the local authorized sales and service representative of respective
manufacturer. If none is available in your locality, contact the TGW Systems representative.
TGW Systems will not be responsible for units that have been tampered with or disassembled
by anyone other than the authorized representative of the respective manufacturer.
THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, EXTENDING BEYOND THOSE SET FORTH IN THIS STATEMENT OF
WARRANTY.
Rev 08/22/2011
Revision Date: 12/10/2014 Page 7 of 111
To Next Page
Loading...