Natrix IOM
Warnings and Safety Instructions
Failure to follow the instructions and cautions throughout this book, and warning labels on the
conveyor, may result in injury to personnel or damage to the equipment.
Your TGW Systems conveyor is powered by a motor and can be stopped only by turning off
electrical power to the motor. As with all powered machinery, the drive-related components –
including sprockets, belts, shafts, universal joints and pneumatic devices – can be dangerous.
We have installed or provided guards to prevent accidental contact with these parts, along with
warning labels to identify the hazards.
Special attention must be paid to the following areas of this manual:
Warnings and Safety Instructions
• Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
• Indicates a situation which, if not avoided, could result in property
damage.
NOTE
This is where you will be notified of helpful information.
Revision Date: 12/10/2014 Page 13 of 111
To Next Page
Loading...