Topcon GM-100 Series User Manual

7
3. LASER SAFETY INFORMATION
The instrument is classified as the following class of Laser Product according to IEC Standard Publication
60825-1 Ed.3.0: 2014 and United States Government Code of Federal Regulation FDA CDRH 21CFR Part
1040.10 and 1040.11 (Complies with FDA performance standards for laser products except for deviations
pursuant to Laser Notice No.50, dated June 24, 2007.)
*1: Laser plummet is available as a factory option depending on the country or the area where the
instrument is purchased.

• EDM device is classified as Class 3R Laser Product when reflectorless measurement is selected. When
target (reflector) is set to prism or reflective sheet, the output is equivalent to the safer class 1.
Warning
• Use of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
• Follow the safety instructions on the labels attached to the instrument as well as in this manual to ensure safe
use of this laser product.
• Never intentionally point the laser beam at another person. The laser beam is injurious to the eyes and skin.
If an eye injury is caused by exposure to the laser beam, seek immediate medical attention from a licensed
ophthalmologist.
• Do not look directly into the laser beam source or guide light source. Doing so could cause permanent eye
damage.
• Do not stare at the laser beam. Doing so could cause permanent eye damage.
• Never look at the laser beam through a telescope, binoculars or other optical instruments. Doing so could
cause permanent eye damage.
• Sight targets so that the laser beam does not stray from them.
Device Laser class
EDM device in objective
lens
Light beam used for measurement
(When target (reflector) is set to N-prism.)
Class 3R
Light beam used for measurement
(When target (reflector) is set to prism or reflective
sheet.)
Class 1
Laser-pointer Class 3R
Laser plummet
*1
Class2
Laser beam
emitted
from here*
Laser beam
emitted
from here*
LED beam
emitted
from here*

Topcon GM-100 Series Specifications

General

Brand	Topcon
Model	GM-100 Series
Category	Measuring Instruments
Language	English