188
33. CHANGING THE SETTINGS
When a password has been set, the password screen will appear when the instrument is powered ON.
Setting a password allows you to protect important information such as measurement data.
No password is set when the instrument is shipped. When setting a password for the first time, leave the "Old
password" box blank.
Select "Inst. Config" in <Configuration> and select "Password".
PROCEDURE Changing password
1. Select "Change Password" in Config mode.
2. Input old password and press {ENT}.
3. Input new password twice and press {ENT}. The password
is changed and <Config> is restored.
• If no password was input as new password and {ENT} was
pressed, no password is set.
• Password can be from 3 up to 8 characters in length. Input characters will be displayed as asterisks.
• To deactivate the password function, perform the new password setting procedure but enter a "space" in the
"New password" box.
33.9 Instrument Conditions - Password
To Next Page
Loading...
Need help?
General
