20
5. BASIC OPERATION
(7) Laser-pointer/Guide light display
Selecting Laser-pointer/Guide light: "33.7 Instrument Conditions - Instrument", Switching Laser-pointer/
Guide light ON/OFF: "5.1 Basic Key Operation"
:Laser-pointer is selected and ON
:Guide light is selected and ON
(8) Bluetooth communication status
:Connection established
(flashing): Connecting
(flashing): Waiting
(flashing):Disconnecting
: Bluetooth device is OFF
(9) Appears when laser beam is emitted for distance measurement
(10) Input mode
: Inputting capital letters and figures.
: Inputting small letters and figures.
: Inputting numbers.
Pressing the Starkey {} displays the Starkey menu.
In the Starkey mode, you can change the setting commonly used for measuring.
The following operations and settings can be made in the Starkey mode
1. Turning ON/OFF tilt angle correction
2. Adjusting the display unit's contrast (Steps 0~15)
3. Adjusting reticle illmination level (Steps 0~5)
4. Switching the target type
5. Turning ON/OFF laser plummet (for the instrument with the laser centering function)
6. Setting for press and hold the illmination key
7. Turning ON/OFF laser pointer
8. Turning ON/OFF guide light
* The Starkey mode can be called only from the OBS mode.
5.3 Starkey Mode
A
a
1
To Next Page
Loading...
Need help?
General
