Topcon GM-100 Series User Manual

168
30. REGISTERING/DELETING DATA
It is possible to display all the coordinate data within the current JOB.
PROCEDURE
1. Select “Known data” in Data Mode.
• Current JOB name is displayed.
2. Select “View”.
The point name list is displayed.
3. Select the point name to be displayed and press {ENT}.
The coordinates of the selected point name are displayed.
4. Press {ESC} to restore the point name list.
Press {ESC} again to restore <Known data>.
It is possible to save codes in memory. You can also read in codes registered in memory when recording
instrument station data or observation data.
PROCEDURE Inputting Codes
1. Select “Code” in Data Mode.
30.2 Reviewing Known Point Data
30.3 Registering/Deleting Codes
Known data
Job.JOB1
Key in coord
Deletion
Comms input
View
PT
PT
PT
PT
PT
! 012
013
POINT01
ABCDEF
123456789
FIRST LAST SRCH
PT
Data
JOB
Known data
Code

Topcon GM-100 Series Specifications

General

Brand	Topcon
Model	GM-100 Series
Category	Measuring Instruments
Language	English