212
39. ACCESSORIES
Solar filter (OF3A) (optional accessory)
During solar observation, attach it to the objective lens of
the instrument to protect its interior and the eyes of its
operator. The filter part can be flipped up without being
removed.
Power cable/Interface cable (optional accessory)
Connect the instrument to a host computer using the following cables.
• By using the Y cable the instrument can perform RS232C communication (D-Sub 9-pin) at the same time
as connecting to an external power source.
Cable Notes
DOC210 Pin number and signal level : RS232C compatible
EDC211 (Y cable) D-Sub connector : 9 pins (female)
EDC212 (Y cable)
To Next Page
Loading...
Need help?
General
