Surveying with the Receiver
P/N 7010-0557 www.topconpositioning.com
3-17
• Specify the Ambiguity fixing level (not applicable to
RTK Float). The Ambiguity Fixing Level radio buttons
govern the process of the RTK engine, fixing integer
ambiguities. The RTK engine uses the ambiguity fix
indicator when making decisions whether or not to fix
ambiguities. Low, Medium, and High correspond to the
indicator's 95%, 99.5% and 99.9% states, respectively.
The higher the specified confidence level, the longer
the integer ambiguity search time
6. Click the Ports tab and set the following parameters for
Serial C (Figure 3-12 on page 3-18):
• Input drop-down list – select the desired
differential correction format.
• Period (sec) – leave as is.
• Baud rate drop-down list – select a baud rate (i.e.,
the rate at which differential messages will be
transmitted from modem to receiver).
• RTS/CTS – select to enable handshaking.
TIP
TIP
Use a 38400 baud rate. See Table 2-3 on page 2-32 for
information on setting baud rates.
To Next Page
Loading...
