Unpacking Your Receiver Kit
1-3
P/N: 1023998-01
Introduction
• Topcon Integrated Leveling Technology
TM
(TILT)
• External power, USB, and serial-data ports
• GNSS Antenna Connector
• Internal 8 GB memory storage
• Virtual serial port via USB
• One-Pulse-Per-Second (1-PPS) output
• Data access using USB read only
The HiPer VR comes in one of the following configurations:
• R2 Lite UHF radio module
• R2 Lite FH915 radio module
• Without UHF/FH915 radio
Unpacking Your Receiver Kit
This section describes the documentation, standard kit components
1
and accessories that accompany
your receiver. When you unpack your receiver kit, verify that you received the items listed in this
section. If any items are missing or damaged, contact your local Topcon dealer. See
“Getting Technical
Support”.
Standard Kit Components
Table 1-1 lists the standard kit components for the HiPer VR. For more information about the included
cables, see “Cables”.
Accessories
Topcon offers a wide variety of accessories specially designed to improve system flexibility and job
site efficiency. For more details on the optional accessories available for HiPer VR, contact your Topcon
dealer.
1. Components in the standard kits may differ based on your country or region. Contact your local Topcon dealer to
inquire about items included in your regional standard kit and accessories that are available with the receiver.
Table 1-1. HiPer VR Standard Kit Components
HiPer VR Receiver Power Cable
Power Adapter Wall Charger Cable
Micro-USB Cable Serial Cable
HiPer VR GNSS Receiver Quick
Reference Card (P/N 1027033-01)
– Describes the LED behavior and
technical content.
Warranty Card
Radio Antenna
To Next Page
Loading...
Need help?
General
