Technical Documents
1-4
P/N: 1023998-01
Introduction
Table 1-2 lists the accessories available for the HiPer VR. For more information about accessories, see
“Accessories”.
Technical Documents
The following documents will help you set up and use your new receiver.
•
HiPer VR GNSS Receiver Operator’s Manual
(this document)—contains detailed information on
how to use your new receiver. You can download the document from Topcon’s TotalCare
website (https://www.topconpositioning.com/support).
•
HiPer VR GNSS Receiver Quick Reference Card (P/N 1027033-01)
—contains basic hardware and
LED descriptions, along with safety and regulatory statements. This guide is available in your
standard kit package.
•
Topcon Receiver Utility (TRU) Help
—an on-screen help document embedded in the software
that contains detailed information on how to use the TRU software. For more information about
the TRU software, see “Using Topcon Software With Your Receiver”.
Using Topcon Software With Your Receiver
Use the HiPer VR receiver in conjunction with the Topcon Receiver Utility (TRU) and MAGNET
®
Field
data collection software or Pocket 3D machine control system applications for a precision positioning
solution. Topcon software enables you to configure the receiver and other external devices, manage
files, collect data, and perform survey and construction work flows.
The Topcon Receiver Utility (TRU) is a software program that enables users to configure and update
their GNSS receivers and peripheral devices. You can install it on desktop computers and data
controllers. You can download this program from Topcon’s TotalCare website
(https://www.topconpositioning.com/support). The help document for TRU is embedded in the
software.
Topcon’s MAGNET Field software for data controllers provides real-time communication, cloud
storage, data collection and exchange, and field solutions—such as topographic staking, roads,
calculations and more.
Pocket 3D is a machine control system application for the survey and construction markets. The
software runs on data controllers with Windows CE
®
and mobile platforms. Pocket 3D simplifies data
collection, allowing you to check cuts and fills, layout points and survey all or part of the job site
quickly and efficiently.
Contact your Topcon dealer for more information about Topcon field data collection software for the
surveying and construction markets.
Table 1-2. HiPer VR Accessories
Radio Antenna Prism
External Antenna Cable Fixed Height Heavy Duty Tripod
Rover Pole Offset Adapters Economy Tripod
Tribrach with Plug Adapter Tape Measure
Hand-Held Controller and Brackets Prism Adapter
Rover Pole 1-pps Cable
To Next Page
Loading...
Need help?
General
