Topcon HiPer VR - Cleaning and Storing the Receiver; Getting Customer Support

Cleaning and Storing the Receiver
8-7
P/N: 1023998-01
Troubleshooting
Cleaning and Storing the Receiver
• Use a clean cloth moistened with neutral detergent or water.
• Never use an abrasive cleaner, ether, thinner benzene, or other solvents.
• Always make sure the receiver is completely dry before storing it. Dry any moisture with a soft,
clean cloth.
Getting Customer Support
If the troubleshooting hints and tips in this operator’s manual fail to remedy the problem, contact your
local Topcon dealer or visit the Topcon TotalCare website
(https://www.topconpositioning.com/support) for technical support. For contact information, see
“Getting Technical Support”.