Topcon HiPer VR - Specifications; General Receiver Specifications

General Details
9-1
P/N: 1023998-01
Specifications
This chapter describes the internal component specifications for the HiPer VR.
General Details
Table 9-1 lists the receiver’s general specifications.
Table 9-1. General Receiver Specifications
Item Specification
Physical
Enclosure Magnesium Alloy housing
Color Topcon Yellow/Gray bumper
Dimensions (mm) 149 (w) x 149 (l) x 94.6 (h)
Weight (kg) 1.061
Internal GNSS Antenna
Internal integrated Fence Antenna
®
Technology with internal
ground plane
External GNSS Antenna Connector: SMB
Nominal impedance: 50 Ohm
LNA power: +4.5 to 5.5 @ 0-120 mA
Over current protection values: minimum: 102 mA, typical:
115 mA,
maximum: 140 mA
Battery 1-Battery—2-Lithium-ion internal cells (battery packs). Each
pack is 3.6V, 6.96 Ah, 25.1 Watts
Seals Silicon (molding in color)
Key 1 Power Key – On/Off and Start/Stop Data Logging
LEDs 7 status LEDs:
•Power
•STAT
•REC
• Bluetooth
•Cellular
•Radio
•BATT
Port, Bus and Connectors 1 Port:
•Serial
1 Bus
•USB Serial
3 Connectors
•Power
• External GNSS antenna
• External Radio antenna