Accessories
2-7
P/N: 1023998-01
Getting Acquainted
Accessories
Topcon offers a wide variety of accessories specially designed to improve system flexibility and job
site efficiency. For more details about the available accessories, contact your Topcon dealer.
1
• Power Supply Unit (P/N 1005555-01): This item charges the internal battery when connected
to a grounded outlet. This unit converts the Alternating Current (AC), normally supplied from
an electrical outlet, to Direct Current (DC) for charging the battery, and/or powering the
receiver.
• Modem Antenna: The Spread Spectrum (FH915) antenna is a reverse polarity TNC RF
connection (P/N 30-030012-01). The UHF antenna is a BNC connection (No antenna needed),
the UHF 406-440 (P/N 1001560-02) and UHF 440-470 (P/N 30-050501-01).
• Universal Tribrach and Tribrach Adapter
2
(P/N 22-006008-01 and P/N 22-006009-01):
These items level the tripod, and secure the receiver or antenna to the tripod.
• Precision Tribrach Adapter: This item precisely centers, aligns, and levels the tripod over a
point. The horizontal spacer (P/N 51842) inserts into the precision tribrach, and allows the
receiver to sit securely on the precision tribrach.
• Wooden Tripod (P/N 59010)
• Heavy Duty Tripod (P/N 22-050501-01)
• Two (2) Meter Fixed Height Rover Pole (P/N 22-050908-01)
• Hand-held Controller: This items allows the HiPer VR Base and Rover systems to be
configured and monitored directly in the field. Use the Topcon Receiver Utility (TRU) to
configure the receiver, and any Topcon field data collection software.
• MAGNET and Pocket 3D machine control software: These items can be used to operate
the receiver. See the
TRU Help
(embedded in the software) or the help files in the field collection
software for more information.
• Hybrid Positioning Adapter (P/N 1003241-01)
• 100 mm Prism Spacer (P/N 51949)
• Tape Measure (P/N 22-050902-01) HV1034DM 3/4 x 12 ft./3.7 Meters PWR Tape 10ths.
• One (1) pps Cable (P/N 1016157-01)
1. Some accessories may be included in the standard kit for your region. Contact your dealer for details.
For additional information about antenna part and serial numbers, see Table 10-1.
2. The universal tribrach and tribrach adapter are not needed when using a heavy duty tripod.