Topcon HiPer VR User Manual

Managing Files
7-6
P/N: 1023998-01
Collecting Data
When the memory is full, the receiver stops logging data, and the REC LED turns dark/off, indicating
an error condition. Existing data are not overwritten.
To delete raw data files from the internal memory of receiver do the following:
• Right click on the desired file(s) to open the context menu and select Delete.
• Click Yes to confirm, them click OK.
• TRU starts deleting the selected file(s) from the receiver memory.

Topcon HiPer VR Specifications

General

Battery Life	Up to 10 hours
Ingress Protection	IP67
Internal Memory	8 GB
Signal Tracking	GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS
Static Accuracy Horizontal	3 mm + 0.1 ppm
Static Accuracy Vertical	5 mm + 0.5 ppm
Communication	Bluetooth, Wi-Fi
Operating Temperature	-40°C to +65°C
Update Rate	20 Hz