Topcon IS Series User Manual

111
6 PARAMETERS SETTING MODE
6.2 Setting Parameters
[Example setting] S/A BUZZER: OFF
1 Press the [SETUP] icon.
2 Press the [MEASUREMENT] key.
3 Press the [MEASUREMENT1] key.
4 Press the [NEXT] key three times.
5 Select the [OFF] button of S/A BUZZER.*1)
6 When the [SET] key is pressed, the setting will
be set and the SETUP MODE screen will
reappear.
*1)To return to the SETUP MODE screen, press the [EXIT] key.

Topcon IS Series Specifications

General

Brand	Topcon
Model	IS Series
Category	Measuring Instruments
Language	English