68
3 AUTOMATIC TRACKING / AUTOMATIC COLLIMATION
6) Prediction operating time
After the instrument loses a prism, the time (prediction operation time) for the instrument to continue
moving operation can be set up.
During auto tracking operation, when auto tracking axis between the instrument and a prism is
intercepted by a tree etc., the moving is continued supposing a motion (prediction) of the prism till then.
It is effective in auto tracking operation after the prism is intercepted with the obstacle by this function.
When an obstacle is large, the prediction operation time should be set up long.
Moreover, when you want to terminate auto tracking operation immediately at the point which missed
the prism, and to be changed into a search state. Prediction operation time should be set up short.
Settable time: 0.5sec, 1sec, 2sec, 3sec, 4sec, 5sec
3.4.2 How to set the parameters
Sample setting: Reflector Type [Prism], Prediction Ctrl Time [5 sec], Track Speed [Survey]
1
Press the star [ ] key to set the star key
mode.
2
Press the [Auto-tracking parameters set] icon.
3
Press the [Track Setting] key.
4
Select the Reflector Type.
5
Select the Prediction Ctrl Time.
6
Select the Track Speed.
7
Press the Enter key.
To Next Page
Loading...
Need help?
General
