43
1 NOMENCLATURE AND FUNCTIONS
1.15Using together with RC-3 Remote Control System
Using together with RC-3 Remote Control System makes it possible to optical communicate between
the instrument and remote controller RC-3, the prism side. This gives easy operation by one man
surveying in applying programs.
Also connecting data collector to remote controller, you can manage communication reciprocally
between the instrument and direct to data collector.
Turn-round function
You can turn the IS series round to the remote controller side easily by [Turn-round] key of the remote
controller. This function helps to increase one man surveying efficiency.
See to 5 “PROGRAM MODE” and 6 “PARAMETERS SETTING MODE” for further information.
• Set the transmit channel same as the remote controller side.
RC-3
To Next Page
Loading...
Need help?
General
