15
• Resetting the baud rate to 115200, if the receiver’s original baud rate ex-
ceeded 115200;
• Restoring the original baud rate (i.e., that the receiver had before running PC-CDU),
only if the option Restore the receiver’s original baud rate
on Disconnect has been selected.
To quit PC-CDU, select Exit from the File menu. Alternatively, you can close the program by
pressing the keys C
TRL+X. If the receiver has not been disconnected by the time the program is
terminated, the connection will be automatically broken before PC-CDU is closed.
It is strongly recommended to close the connection with the receiver and close
PC-CDU prior to switching the receiver OFF and disconnecting the cable.
To Next Page
Loading...