73
• vertical velocity RMS error;
• total velocity RMS error, the square root of the trace of the
velocity
error
covariance
matrix;
• the number of the position estimates for each of the four solution types (in percent)
and their total as well;
• the maximum and average
Easting to Target
and
Northing to Target
in the local system
with the origin at the receiver.
Use the Clear all points button to erase all plotted points in the window.
When you press the button Fit all points, PC-CDU will automatically change the scale of the
Scatter plot allowing you to view all positions, starting from the time PC-CDU established the
connection to the receiver.
After you press Target to average, PC-CDU sets the target position equal to the average re-
ceiver’s position.
If this window is closed, the positions displayed in the Scatter plot and information in the status
bar will not be discarded (unless the receiver is disconnected), thus when the window is reopen
later, it will include both the current position information and data, beginning from the time you
turned on PC-CDU.
To Next Page
Loading...