Toro Multi Pro 1750 - Page 256

Multi Pro 1750Page 7 − 30Drive Train
28.Disassemble differential gear assembly:
A. Use a bearing puller to remove bearing (item 1)
from differential case.
B. Remove snap ring.
C. Use a bearing puller to remove bearing and
slider.
D. Loosen screws from ring gear.
E. Remove ring gear from differential case and re-
move dowel pins.
F. Drive lock pin out of pinion shaft.
G. Remove pinion shaft from differential case.
H. Remove differential pinions and liners.
I. Remove L.H. side gear, R.H. side gear and liners.
1. Bearing
2. Snap ring
3. Bearing
4. Diff lock slider
5. Screws
6. Ring gear
7. Dowel pin (2)
8. Lock pin
9. Pinion shaft
10. Pinion (2)
11. Liner (2)
12. L.H. side gear
13. R.H. Side gear
14. Liner (2)
Figure 39
1
15
5 SLIT 11 8 4
2
12 7 6 9 10 14 13 3
1. Bearing
2. Snap ring
3. Bearing
4. Diff lock slider
5. Screws
6. Ring gear
7. Dowel pin (2)
8. Lock pin
9. Pinion shaft
10. Pinion (2)
11. Liner (2)
12. L.H. side gear
13. R.H. Side gear
14. Liner (2)
Figure 40
2
3
4
6
7
11
10
14
13
9
8
12
14
10
11
1
5
15