Toro Multi Pro 1750 - Page 269

Multi Pro 1750 Page 7 − 43 Drive Train
15.Assemble reduction shaft and countershaft together
with 1st−reverse fork shaft.
NOTE: This
used on
shaft not
Multi Pro
1
Figure 75
16.Insert reduction shaft and countershaft assembly
into transaxle case. Insert head of shift arm into groove
of fork when installing the assembly.
N
OTE: Not
used on
Multi Pro
Figure 76
17.Assemble main shaft together with 2nd−3rd fork
shaft.
Figure 77
18.Insert main shaft and 2−3 fork shaft assembly into
transaxle case. Insert head of shift arm into groove of
fork while installing.
NOTE: Not
used on
Multi Pro
Figure 78
Drive Train