8
© 2012 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856(Ver03)
ERROR CODE AND TROUBLESHOOTING
8 - 7
E3C0 Paper transport jam Tandem LCF transport jam (paper not reaching
registration sensor): Paper which has passed the
1st transport sensor does not reach the registration
sensor during the feeding at the Tandem LCF.
P. 8 - 4 1
E3C1 Tandem LCF transport jam (paper not reaching
intermediate transport sensor): Paper which has
passed the 1st transport sensor does not reach the
intermediate transport sensor during the feeding at
the Tandem LCF.
P. 8 - 4 2
E3D0 Tandem LCF transport jam (paper not reaching 1st
drawer transport sensor): Paper which has passed
the 2nd drawer transport sensor does not reach the
1st drawer transport sensor during the feeding at
the Tandem LCF.
P. 8 - 4 1
E3E0 Tandem LCF transport jam (paper not reaching 2nd
transport sensor): Paper which has passed the 3rd
drawer / Tandem LCF transport sensor does not
reach the 2nd drawer transport sensor during the
feeding at the Tandem LCF.
P. 8 - 4 7
E3F0 Tandem LCF transport jam (paper not reaching 3rd
drawer / Tandem LCF transport sensor): Paper
which has passed the 3rd drawer / Tandem LCF
feed sensor does not reach the 3rd drawer /
Tandem LCF transport sensor during the feeding at
the Tandem LCF.
P. 8 - 4 5
E410 Cover open jam Front cover open jam: The front cover has opened
during printing.
P. 8 - 6 3
E440 Right lower cover (feed cover) open jam: The feed
cover has opened during printing.
P. 8 - 6 3
E450 Option LCF side cover open jam: The side cover of
the Option LCF has opened during printing.
P. 8 - 6 4
E460 Right center cover (bypass feed unit cover) open
jam: The bypass feed unit cover has opened during
printing.
P. 8 - 6 4
E470 Left lower cover (exit cover) open jam: The exit
cover has opened during printing.
P. 8 - 6 5
E510 Paper transport jam
(Exit/Reverse section
or other sections)
Transport jam during duplex printing (paper not
reaching reverse sensor-2): Paper which has
passed the reverse sensor-1 does not reach the
reverse sensor-2 during duplex printing.
P. 8 - 4 8
E511 Transport jam during duplex printing (paper not
reaching horizontal transport sensor-1): Paper
which has passed the reverse sensor-2 does not
reach the horizontal transport sensor-1 during
duplex printing.
P. 8 - 4 8
E512 Transport jam during duplex printing (paper not
reaching horizontal transport sensor-2): Paper
which has passed the horizontal transport sensor-1
does not reach the horizontal transport sensor-2
during duplex printing.
P. 8 - 4 9
E540 Transport jam during duplex printing (paper not
reaching horizontal transport sensor-3): Paper
which has passed the horizontal transport sensor-2
does not reach the horizontal transport sensor-3
during duplex printing.
P. 8 - 4 9
E550 Paper remaining jam at paper transport path: Paper
is remaining on the paper transport path when the
printing has finished. (Jam caused by a multiple
paper feeding)
P. 8 - 5 0
E551 Paper remaining on the transport path (when a
service call occurs)
P. 8 - 5 1
Error code Classification Contents Troubleshooting
To Next Page
Loading...
