E6582062
3-3 3. [Basic operation] Operation panel and screen display
3
9
10
■ Website (QR code)
When you press the [i] key, information is displayed.
For example, you can access easily from your smartphone
to our website by displaying the QR code.
■ Trip information
You can check the trip information of possible causes and remedies. When you press the [F2] key,
you can see QR code for troubleshooting.
When a trip occurs, the trip title and trip name blink, and the backlight of the LCD screen turns red to
inform you of a trip.
↓Press[i] key
↓Press[F2] key
Note) If the camera cannot scan QR code because of the red screen, you can change the backlight
color from red to white by pressing the [F2] key.
0.0HzSTOP
17:17
Website top
Scan the QR code to
access the detailed
information
ESC =Return
Top MonitorReturn
Setting
0.0HzTrip
10:02
Standard Mode
E
Screen
Emergency off
Monitor
F R
0.0HzTrip
10:02
E : Emergency off
F R
Top Return
Monitor
(Possible causes)
Emergency off is input. 1) When a run
command is other than the operation
panel, [STOP/RESET] key was pressed
twice.
0.0HzTrip
10:03
E : Emergency off
Scan the QR code for
troubleshooting.
ESC =Return
Top MonitorReturn
F R
To Next Page
Loading...
