E6582062
3. [Basic operation] Operation panel and screen display 3-16
3
9
(2) Copying to inverter (downloading)
(1) Select "Copy to the drive", and press the [OK] or
[F2] key.
(2) Select a file to be downloaded to the inverter and
press the [OK] or [F2] key.
(3) The selected file is displayed.
(4) When you press the [OK] or [F2] key, copying
from the file (memory) of the LCD body to the
parameters of the inverter body is started.
(5) When the transfer is completed normally, the file
name and CRC are displayed.
0.0HzSTOP
15:37
Copy function
Copy to the drive
Copy to the keypad
F R
Top Return
0.0HzSTOP
15:21
Copy to the drive (selection)
VFAS3-2037P#1
VFAS3-4075PC#2
VFAS3-2007P#1
F R
Top Return
0.0HzSTOP
15:22
Copy to the drive (selection)
F R
Top Return
The copy will start when OK-key is pushed.
VFAS3-2037P#1
0.0HzSTOP
15:22
Copy to the drive (finish)
F R
Top Return
The copy has been completed.
VFAS3-2037P#1
CRC=FA1C
To Next Page
Loading...
