E6582062
8-9 8. Monitoring operation status
3
4
8
9
62 PID result frequency 0.1 Hz 154
Signed speed feedback
frequency (1-second filter)
0.1 Hz
63 PID set value 0.1 Hz 155 Signed torque 1%
64
Light-load high-speed
switching load torque
1% 156 Signed torque command 1%
65
Light-load high-speed torque
during constant speed run
1% 158 Signed torque current 1%
66
Pattern operation group
number
0.1 159 Signed PID feedback value 0.1 Hz
67
Pattern operation remaining
cycle number
1160
Signed terminal RX input
value
1%
68
Pattern operation preset
speed number
1161
Signed terminal AI4 input
value
1%
69
Pattern operation remaining
time
0.1 162
Signed terminal AI5 input
value
1%
70 Inverter rated voltage 1 V
*1 Filtered value.
Filter time constant can be set by <F722>.
*2 For details, refer to “RS485 Communication Function Instruction Manual” (E6582143).
Setting
value
Function name Display unit
Setting
value
Function name
Display
unit
To Next Page
Loading...
