E6582062
13. Trip information and measures 13-12
4
4
8
9
13
nErr No error No trip records in the past trip history on
[Monitor mode].
-
OFF Standby OFF The input terminal with assigned standby is
OFF.
-
PASS Password
coincidence
Entered number in <F739: Password
verification> matched <F738: Password
setting>.
-
rJOG Rev JOG Reverse jog run in progress. -
rtry During Retry/Speed
search
Retry/speed search in progress. -
SEt Region setting
acceptable
• Display at first power on.
• Display after setting <SEt> = "0".
Set a region to use in the setup menu.
Srvo During servo lock Servo lock in progress. -
Std Setting mode Switched to [Setting mode]. -
StOP During deceleration
stop at power failure
Deceleration stop at power failure in
progress.
A message indicates deceleration stop
during power failure. The stop state is kept
until the run command is turned OFF.
tUn During learning Learning the brake sequence or light-load
high-speed operation in progress. ("tUn1"
and the output frequency are alternately
displayed)
-
tUn2 Light-load high-
speed learning
setting error
Error exists in learning operation. Refer to Operation Manual, and perform
learning operation.
U--- Waiting for search Waiting for search condition in <Changed
parameters search & edit>.
-
U--F During forward
search
Forward search in progress in <Changed
parameters search & edit>.
-
Undo All key unlocked When "Locked" is set in <F737: Panel keys
lockout>, pressed [OK] key for five seconds
or more.
The key operation on the operation panel is
temporarily valid.
U--r During reverse
search
Reverse search in progress in <Changed
parameters search & edit>.
-
USA Setting for North
America
Setting for North America is selected in the
setup menu.
-
Message
display
English Description Remarks
To Next Page
Loading...
Need help?
General
