Toshiba TOSVERT VF-S11 User Manual

E6581158
A-14
1
3) Control circuit terminal board
The control circuit terminal board is common to all equipment.
P24
PP VIA VIB CC
PLC S1 S2 S3
FM VIA
PLC
SOURCE
SINK
SW1
OUT NO FM CC
FLA FLB FLC RY RC
F R RES CC
V
I
V side
I side
Optional connector
(RJ45)
M3 screw
(0.5N･m)
Wire size Factory default settings of slide switches
Solid wire: 0.3 ∼ 1.5（mm
2
） SW1: SINK side (WN, AN type)
SOURCE side (WP type)
Stranded wire: 0.3 ∼ 1.5（mm
2
） FM: V side
（AW G 22 ∼ 16） VIA: V side
Sheath strip length: 6 (mm）
Screwdriver: Small-sized flat-blade screwdriver
(Blade thickness: 0.4 mm or less, blade width: 2.2 mm or less)
See 2.3.2 for details on all terminal functions.

Toshiba TOSVERT VF-S11 Specifications

General

Model	TOSVERT VF-S11
Category	Inverter
Output Frequency	0.1-400Hz
Frequency Range	0.1-400Hz
Control Method	V/f Control, Sensorless Vector Control
Power Rating	0.2kW to 15kW
Cooling Method	Forced air cooling
Overload Capacity	150% for 60 seconds
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication	Modbus RTU
Input Voltage	200-240V, 380-480V
Braking Unit	Built-in (optional external braking resistor)