10-Enhanced Features Epic Edge™ OEM Integration Manual
100-14444 Rev B August 2018 Page 171
ACK or NAK of received packet (if enabled)
If enabled in the POR.INI file, and packet protocol is enabled, this status information will
be reported when a packet is received.
ID = 0x89
Format: ID <b1>
Length: ID + 1 status bytes
B1 = ACK character <06> if the packet was received ok.
B1 = NAK character <21> if the packet was not correct. (i.e. CRC wrong, sequence
number wrong, Endpoint undefined, framing error, …). See the section on the packet
protocol for more information.
Plain text description of printer state
This status record is a text description of the current state of the printer.
Note: This description is for display and debug purposes only, and
should not be used to detect errors with the printer.
ID = 0x8a
Format: ID text
Length: ID + 256 text bytes
To Next Page
Loading...
