10-Enhanced Features Epic Edge™ OEM Integration Manual
Page 170 August 2018 100-14444 Rev B
Extended status bits
If enabled in the POR.INI file, this status information will be reported periodically. This
status information is extended status of the printer as defined below.
ID = 0x88
Format: ID <b1> <b2> <b3> <b4> <b5> <b6>
Length: ID + 6 status bytes
B1 bit0 = Ticket Out
B1 bit1 = Ticket Low
B1 bit2 = Chassis Open (Racked out)
B1 bit3 = Printer Data Error
B1 bit4 = Cover Up (not latched)
B1 bit5 = No top of form not seen error.
B1 bit6 = ALWAYS 1
B1 bit7 = ALWAYS 0
B2 bit0 = Paper Jam/Mis-feed
B2 bit1 = Ticket Present
B2 bit2 = Printer Error
B2 bit3 = Critical Field Printed
B2 bit4 = TBD
B2 bit5 = TBD
B2 bit6 = ALWAYS 1
B2 bit7 = ALWAYS 0
B3 = TBD
B4 = TBD
B5 = TBD
B6 = TBD
To Next Page
Loading...
